Product parameter
Quantity: 1 piece (1 pair is required, please take 2 pieces)
Name: COB light board for car reading light
Lamp beads: 16 smd/24smd/ 36smd/48smd
Power: 2W
Lumens: 240LM
Color: white light, ice blue
Voltage: DC12V direct current (the output voltage of a general car)
Uses: reading lights, roof lights, trunk lights, room lights, etc.
Interface model: T10 w5w / Festoon/BA9S T4W
Instructions for use: 3M adhesive stickers are attached to the back for easy fixation (to prevent the light board from moving in the lampshade).
Detailed description:
1. Can be used for roof lights, reading lights, door lights, license plate lights, etc.
2. The model is the same as the original car, no need to change the circuit, just replace the original car bulb.
3. There is no delay in lighting, and the response time is fast. Without filament structure, the vehicle control circuit is not easy to oxidize, and the service life can reach 30,000 to 50,000 hours.
4. Low energy consumption, high brightness, higher cost performance.
5. The color is rich and pure, and it can be DIY at will, highlighting the personalized lighting.
6. Cold light source, good comfort, belongs to green environmental protection light source
Install:
1. The diameter is the same as that of traditional bulbs, which can be directly replaced with traditional bulbs without the need to modify the circuit
2. When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage.
3. Not suitable for 24V large trucks and buses, please check carefully before installation!
4. The LED has positive and negative poles, if it is not bright, just change the direction (that is, change the electrode means)"